Sauder Clifford Place Serie Instrucciones De Montaje página 22

Step 18
å
Insert the upper drawer into the upper EXTENSION RAILS
of your unit by lining up the EXTENSION SLIDES on the
drawer with the EXTENSION RAILS on the unit. Push the
drawer into the unit until the drawer is fully inserted. The
drawer will push in hard until it is all the way in, then it will
slide in and out easier.
å
Fasten the straps to the DRAWER BACK (K) using a barrel
nut, WASHER (14), and machine screw as shown in the
large diagram to the right.
STOP
Before you proceed
to the next step
If you are attaching the
421116 Hutch to your
unit, build the Hutch
now.
Page 22
K
www.sauder.com/service
strap
machine
screw
washer
barrel nut
14
421114