Sauder Clifford Place Serie Instrucciones De Montaje página 24

Step 19
å
Peel appliques from the SMALL APPLIQUE CARD (17) and stick them onto each visible HIDDEN CAM.
å
Push the RUBBER SLEEVES (14) over the METAL PINS (13). Insert the METAL PINS into the hole locations of your
choice in the ENDS (A and B). Set the ADJUSTABLE SHELF (E) onto the METAL PINS.
å
NOTE: To raise a corner of the unit, turn the ADJUSTABLE GLIDE counter-clockwise. To lower a corner, turn the
ADJUSTABLE GLIDE clockwise.
å
To insert a drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the
unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way
in, then it will slide in and out easier.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
And to celebrate, why not share your success story at sauder.com or
HOOK
10 lbs.
Finished edge
NOTE: Make
any needed
adjustments to
the ADJUSTABLE
GLIDES to level
your unit.
Page 24
A
B
E
www.sauder.com/service
13
(4 used)
14
25 lbs.
17
433364