Weber SE-410 Manual Del Usuario página 10

Hose Connection &
Leak Checking
Connect the Hose to the Gas Supply
A quick-disconnect device connects your grill to
the gas supply. Gas will not flow unless the quick-
disconnect is properly engaged.
1) Check that all burner control knobs are in the off
position. Check by pushing in and turning knobs
clockwise (A).
2) Slide the collar of the quick-disconnect back (B).
3) Push male fitting of the hose into the quick-
disconnect and maintain pressure. Slide the collar
closed (C). If it does not engage or lock, repeat
procedure. Proceed to "CHECKING FOR GAS
LEAKS".
UNLOCK GRILLING HAPPINESS
10
73208_Gen_II_NG_080116_US.indd 10 8/15/16 10:12 AM