Publicidad
Idiomas disponibles
Idiomas disponibles
How to get a professional ironing finish
A normal iron generates only a small quantity of steam. ln this
case it is necessary to products steam constantly in order to
eliminate crease in the fabric being ironed.
A professional ironing system works rather differently. The
fabric is first made damp by the steam and
phase,
dry-ironed in the normal way. This means that
Tiniest crease is removed and your garments are ironed to
perfection.
ln the first phase (steam-damping of the fabric),hold the iron
about 20 cm above the fabric and press the steam(3). Pass the
iron over the garment in a circular movement so that the
powerful jet of steam damps the fabric. Lightly creased
garments require only a few moments of
heavy fabrics or garments with particularly difficult creases
must be
damper,
more.
During the second phase (dry
thermostat knob is in the correct position for the type of fabrics;
release the steam button(3) and dry-iron the garment. The
special ironing plate will prevent the fabrics from becoming
shiny. Using this ironing
suggestions in the chart
garments a really professional ironing finish.
so steam must be applied for a few seconds
technique,
below,
steaming.
ironing),
and following the
you will find it easy to give your
then,
in a second
every.
While very
check that the
Publicidad
