Descargar Imprimir esta página

Gaggenau VI 422 613 Instrucciones De Instalación página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

en-us
Installation Procedure
Installing the heat shield
9
CAUTION
Sharp edges. Use protective gloves when installing
the plate.
For safety reasons, the heat shield must be properly
installed. This prevents components from overheating as
a result of the recirculation of hot air from the cooktop.
The heat shield is the same width as the cooktop. For
shipping, it is screwed to the burner box.
After unpacking the cooktop, unscrew the heat shield.
The heat shield will be able to rotate freely, as shown in
the illustration.
10
Install Appliance
9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
1.
Connect the connection cable to the control cable in
the socket on the bottom of the appliance. The plug
must snap into place.
2.
Evenly insert appliance into cut-out. Press appliance
firmly into the cut-out.

Publicidad

loading