Capitani SL 8000 AUTO Instrucciones De Uso página 25

Remove the appliance and the accessories from the packaging and put them in an appropriate
place. The original packaging has been designed to protect the appliance during shipment.
We suggest you keep the packaging for future use.
Packaging materials should be kept out of children's reach as they may pose a hazard.
• For the cleaning of materials and fabrics, follow the instructions given on the product label; if no
care label is available, contact the manufacturer to obtain more information.
• This multi-function cleaner should only be used on materials with characteristics that make them
suitable for this type of cleaning.
• We do not recommend the use of adaptor plugs, split wires and/or extension leads.
• Do not touch the appliance with wet or moist hands and/or feet.
• Do not expose the appliance to atmospheric agents (rain, sun, frost, etc.)
• If the protective thermostat comes into operation, the appliance will stop automatically. Before
restarting, have the
appliance inspected by an authorised service centre.
• Contact an authorised service centre if you need to de-scale the boiler.
Due to the manufacturing process, some residues may be left in the appliance ducts, so when the
steam function is used for the first time, be certain to apply the steam jet to a cloth first, before
proceeding to clean your textiles; this will eliminate any existing residues.
During the preparation of the multi-function cleaner, the plug must be disconnected from the socket.
PREPARING THE APPLIANCE READY FOR USE
Before operating the appliance, fill the boiler to allow steam
to be generated:
- fill the bottle (p) with tap water;
-remove the tank cap (3); Fig. 2
- turn the fill bottle (p) upside down on the tank opening; Fig2a.
- fit the cap (3) back on the tank.
When the water tank is empty, an acoustic alarm will inform
you that after 4 minutes steam will not be released any more.
You need to fill the tank with water
PACKAGING
WARNINGS
NOTE
Fig. 1
3
Fig. 2
22
p
Fig. 2a