Publicidad
Idiomas disponibles
Idiomas disponibles
cleaning agents containing chlorine. Do not use steel wool,
GB
metallic utensils, or any sharp or pointed objects for cleaning.
Do not use petrol or solvents!
• No parts are dishwasher safe.
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could
damage it.
• Do not move the appliance while it is under operation. Dis-
connect the appliance from power supply when moving and
hold it at the bottom.
Troubleshooting
If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
Problems
Possible cause
- Power connections
are not connected
The appliance
properly with
does not
the power grid.
switch ON.
- ON / OFF button
is not pressed.
- This is normal.
Cooling fan is op-
The cooling fan
erating even after
continues running
the appliance is
in Standby mode
switched to OFF
for some time to
mode.
cool down all inter-
nal elements.
10
Error code identification
Error codes
E1
E2
E3
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
Possible solution
ranty, state where and when it was purchased and include proof
- Check the power
of purchase (e.g. receipt).
plug to make
In line with our policy of continuous product development we
sure it is con-
reserve the right to change the product, packaging and docu-
nected properly.
mentation specifications without notice.
- Press and hold
ON / OFF button
Discarding & Environment
to switch the
appliance ON.
- Wait until the
cooling fan stops
rotating.
rule may be penalized in accordance with applicable regula-
tions on waste disposal. The separate collection and recycling
of your waste equipment at the time of disposal will help con-
serve natural resources and ensure that it is recycled in a man-
ner that protects human health and the environment.
For more information about where you can drop off your waste
for recycling, please contact your local waste collection compa-
ny. The manufacturers and importers do not take responsibility
for recycling, treatment and ecological disposal, either directly
or through a public system.
Possible cause
Possible solution
Unplug the appliance,
The temperature
remove the cookware,
of the appliance is
wait until the appliance is
too high
completely cool down.
Cooling fan
Contact the supplier.
defective
The temperature of
the cookware is too
Unplug the appliance,
high. Possibly, the
remove the cookware,
cookware becomes
wait until the appliance is
empty and appli-
completely cool down.
ance will shut down
for protection.
Damage of temper-
Contact the supplier
ature sensor
The supply voltage
Make sure that the
is abnormal. (Sup-
appliance is connected
ply voltage is too
to a suitable electrical
high or too low)
power supply.
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose
to your waste equipment by handing it over to a
designated collection point. Failure to follow this
Publicidad
