Publicidad
Idiomas disponibles
Idiomas disponibles
Natural Gas Conversion for Model# 720-0830F
Searing Side Burner Conversion
Tools required:
The step-by-step instruction for converting the searing side burner's orifice are stated below.
1.
Remove 2 screws at each corner of the searing side burner and one screw for igniter.
2.
Remove the searing side burner LP (Liquid Propane) orifice with 6mm driver, then Replace the NG
(Natural Gas) orifice to the connector by hand from beneath of side burner, then replace the side burner to
the original position, tighten screws for all corners.
Phillips Head Screwdriver (+)
6 mm Nut Driver
31
Publicidad
