GB
IE
The specifi ed total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specifi ed total vibration value and the
stated specifi ed noise emission value can
also be used for a provisional assessment
of the load.
Warning: The vibration and noise
emissions may deviate from the
specifi ed values during actual use of the
power tool, depending on how the power
tool is being used and, in particular, what
kind of material is being worked on. Safety
measures for the protection of the operator
are to be determined that are based on an
estimate of the actual vibration load under
the real operating conditions (for this, all
parts of the operating cycle are to be taken
into account, for example, times in which
the electric tool is turned off, and those
during which it is turned on but running
without a load).
Safety instructions
CAUTION! When using power
tools, observe the following basic
safety measures for the prevention
of electric shocks and the risk of
injury and fi re.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.
Symbols and icons
Symbols on the device
Caution!
Read the operating instruc-
tions.
20
Danger due to materials
blown out of machine!
Remove persons in the vicin-
ity from the danger area.
Wear ear and eye protec-
tion!
Warning!
Risk of injury from the rotat-
ing tool! Keep hands and
feet away.
Do not expose the device to
the damp.
Wear gloves!
Noise level specifi cation
L
in dB
WA
Electrical appliances must
not be disposed of with the
domestic waste.
Direction of travel of brush
This device is part of the
Parkside X 20 V TEAM
series.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with infor-
mation on preventing damage.