Publicidad
Idiomas disponibles
Idiomas disponibles
4. Remove the lower hinge assembly from lower right corner and remove the
hole cap, screw cap from lower left corner. Dismantle the hinge shaft and
adjustable foot and install them on the other side of lower hinge. Then install
the lower hinge assembly on lower left corner by fitting screws, and install the
hole cap and screw cap on lower right corner.
5. Dismantle the stoppers, sleeve pipes of both refrigerator and freezer door,
install them on the other side of both doors. Exchange the installation
position of sleeve pipe and hole cap on upper end cap of refrigerator door.
Remove the left decorative cover of freezer door, and move the sleeve pipe.
6. Install the refrigerator compartment door on the lower hinge and then
install the middle hinge, screws and caps.
hale
12
screwcap
sleeve pipe
stopper
support
screw
V.2
Publicidad
