2 Packing List
Assembled KickScooter
When unpacking your KickScooter, please verify that the above items are included in the package. If you are missing any
components, please contact your dealer/distributor or nearest service center (see Contact in the user manual). After
verifying that all components are present and in good condition, you can assemble your new KickScooter.
Please retain the box and packaging materials in case you need to ship your KickScooter in the future.
Remember to power off your KickScooter and unplug the power cord before assembling, mounting accessories, or
cleaning the mainframe.
04
User Materials
USER MANUAL
QUICK START
LIMITED WARRANTY
Accessories
Hex Wrench
Power Cord
Valve Stem Extension
Battery Charger
(Sold Separately)
M5 Flathead Screw x 6
3 Diagram
Bell
Electronic Brake
Brake Lever
Handlebar
Headlight
Reflector
Stem
Quick Release Lever
Reflector
Front Fork
Drum Brake
Kickstand
Dashboard & Power Button
Speedometer: Display the current speed of the KickScooter, as well as to display error codes.
Modes: Three modes available. "ECO" for Energy saving mode (smooth acceleration, suitable for beginners), "D" for Standard
mode and "S" for Sport mode (powerful, only recommended for skilled riders).
Pedestrian mode: Makes pushing the KickScooter easier.
Bluetooth: The icon indicates that the KickScooter has been successfully connected to the mobile device.
Error: The wrench icon indicates that the KickScooter has detected an error.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.
Power Button: Press the button to turn the KickScooter on; press and hold the button for 3 seconds to turn the KickScooter off. When
the KickScooter is on, the headlight is on and press the button to turn the rear light on/off; press twice to switch
between modes.
Electronic Throttle
Dashboard & Power Button
Folding Mechanism
Charge Port
Buckle
Rear Fender
Rear Light
Number plate Area
Hub Motor
Battery
Compartment
05