Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Figure 2
Figure 3
1.3
Install the machine
-Move the machine with installed heat pipe and fittings
before the window, and the distance between the body and
walls or other objects shall be least 50 cm (as shown in Fig.4).
Figure 4
-Elongate the exhaust pipe and snap the flat end of the
exhaust pipe joints into the hole of the window sealing plate
assembly (as shown in Fig.5 and Fig.6)-
Notes 1:The flat end of the exhaust pipe joints must be
snapped into place.
Notes 2: The pipe cannot be distorted nor has substantial
turning (greater than 45 °). Keep the ventilation of the
exhaust pipe not blocked.
11
Publicidad
