10
iNTrODuCiNg YOur DrYEr
Control Panel Features
Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for
more detailed information.
WArNiNg
w
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety
Instructions, before operating this dryer.
Operation
Button
Power On/Off Button
y
- Press to turn the dryer On. Press again to turn the dryer Off.
NOTE : Pressing the On/Off button during a cycle cancels that cycle and any
load settings are lost.
Cycle Selector Knob
y
- Turn this knob to select the desired cycle. Once the desired cycle has been
selected, the standard presets are shown in the display. On Manual Dry cycles,
these settings can be adjusted using the cycle modifier buttons any time
before starting the cycle.
Start/Pause Button
y
- Press this button more than 0.4 seconds hold to start the selected cycle. If the dryer
is running, use this button to pause the cycle without losing the current settings.
NOTE : If you do not press the Start/Pause button to resume a cycle within four
minutes, the dryer turns off automatically.
More Time/Less Time Buttons
y
- To adjust the drying time, use these buttons with Manual Dry, Time Dry, and
Steam Fresh™ cycles, as well as the Reduce Static and TurboSteam options.
Press the More Time button to increase the selected manual cycle time by a
minute; press Less Time to decrease the cycle time by a minute.
Cycle Modifier Buttons
y
- Use these buttons to select the desired cycle settings for the selected cycle.
The current settings are shown in the display. Press the button for that option
to view and select other settings.
Option Buttons
y
- The Option buttons allow you to select additional cycle options. Certain
buttons also allow you to activate special functions by pressing and holding
the button for three seconds.
Steam Functions
y
- LG's steam technology allows you to inject fabrics with a swirling jet of hot steam
to refresh or sanitize clothes, or reduce static. Simply select the Steam Fresh™ or
Steam Sanitary™ cycle. Or you can add a steam option to selected cycles.
Description