Assembly / Cleaning / Disposal
Illustration B:
2. Push the pole
carefully through the accompanying channel
1
Illustration c:
3. Push the poles
carefully through the accompanying channel
2
4. Push the front ends of the poles
section of the tarpaulin
.
3
5. Ensure that all poles (
,
1
2
channels (
,
).
a
b
Illustration D, e:
6. Set the beach shelter in an upright position and insert the poles (
into the eyelets on the bottom of the tarpaulin
Illustration F:
7. Fix the front section of the beach shelter in the ground with the tent pegs
. Then grip the rear end of the tarpaulin
5
way that the beach shelter is taut.
Illustration g:
8. Fix the rear section of the beach shelter in the ground with the tent
pegs
(always 45°).
5
Illustration H:
9. Now secure the beach shelter with the guy lines
(always 45°). Do not make the guy lines
becomes stronger the attachment point and seam of the tent might tear.
taking down the Beach shelter
Q
j
Clean the beach shelter inside and out before you take it down. The
beach shelter must be taken down in the reverse order to which it is
erected.
Packing up the Beach shelter
Q
j
Please ensure that the beach shelter is completely dry before you pack it
together. Otherwise stains and damage to the fabric may result.
j
Fold the tarpaulin
and roll it together.
3
j
Collect all of the parts carefully together before you pack the beach
shelter away. You should count these in order to ensure that none of the
parts has been mislaid or become lost.
j
The tent pegs
and the other individual parts have to be packed sepa-
5
rately into the pockets provided. Otherwise the tent pegs might damage
the tarpaulin.
j
Then pack the rolled-up beach shelter carefully into the carrying bag.
cleaning
Q
j
For cleaning and the removal of any stains you should only use a
cleaning agent which is specifically designated for use with this product.
j
Remove any dirt from the product with a soft sponge and clean water.
j
Never wash the product in a washing machine.
j
Never used petrol, solvent or other cleaning agents.
j
Do not use any sharp objects, as these will damage the coating.
j
Allow all parts to dry thoroughly before you pack the product up again.
This will prevent the formation of moulds, odours and discolouration.
Disposal
Q
The packaging is made entirely of recyclable materials, which you
may dispose at local recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
10 GB/MT
into the tabs provided on the front
2
) have been pushed into the accompanying
.
3
and pull it apart in such a
3
and the tent pegs
4
too tight. If the wind
4
Product Description:
a
.
Beach shelter
Model No.:
Z29745
Version:
12 / 2009
.
b
,
)
1
2
5