Descargar Imprimir esta página

Exo Terra PT2463 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

to guarantee safe daytime-nighttime temperature fluctuations for
your reptiles. The Dual Receptacles allow you to control 2 separate
heating devices, 1 during daytime, 1 during night-time (for instance:
1 incandescent heat bulb during daytime & 1 Heat Mat during
night-time). The Thermostat will also help to prevent overheating
and undercooling during hot summer days or cold winter nights. The
Dimming & Pulse Proportional function keeps the temperature at the
desired set-point with a much higher accuracy than conventional
thermostats and virtually eliminates temperature swings in the
terrarium. The easy-to-read LCD screen shows heating mode, day or
night mode and actual & set temperature. A Red LED and a heating
symbol will indicate when the heating device is powered. Once the
set temperature is reached, the LED will switch to Blue and the
heating symbol will no longer show. Simply connect your Heat Mat,
Heat Cable, Ceramic Heater or Incandescent Heat Bulb to the Exo
Terra Day/Night Thermostat, set the preferred daytime and nighttime
temperatures and place the heat sensor in the desired spot. The
push button/dial system of the thermostat will prevent accidental
changes of the set temperature if the device is being handled.
The Thermostat comes with a 6.2 foot / 190cm power-cord with
grounded plug & receptacle for increased safety and to allow the use
of a power outlet strip. The waterproof remote sensor can be safely
used in highly moist terrariums and aquatic environments.
The Exo Terra
Thermostat should be set according to the needs
®
of the animals. Thoroughly research the preferred optimum
temperature range (POTR) for your specific reptile, so you can
create the correct temperature gradients inside the terrarium to
allow your reptiles to thermoregulate.
4
Always use a Thermometer to monitor the temperature inside
your terrarium. Adjust the Exo Terra
required temperature range for your pet's environment.
NOTE: DAY Receptacle Use visible light emitting (like Exo Terra's
Intense Basking Spot, Daylight Basking Spot or Daytime Heat Lamp)
or non-visible light emitting heat sources (like Exo Terra's Heat Mat,
Heat Cable, Ceramic Heater, Infrared Basking Spot or Night Heat
Lamp) to regulate the day-time temperature (DAY receptacle). This
allows you to create a daytime basking area or increase the ambient
daytime temperature to match the required conditions similar to
those found in their natural environment.
NOTE: NIGHT receptacle Use non-visible light emitting heat sources
(like Exo Terra's Heat Mat, Heat Cable, Ceramic Heater, Infrared
Basking Spot or Night Heat Lamp) to regulate the night-time
temperature (NIGHT receptacle). This allows you to create a
well-controlled 24-hour heating system that will not interrupt your
animal's normal activity cycle, while maintaining the required
temperature conditions similar to those found in their natural
environment.
READ INSTRUCTIONS THOROUGHLY PRIOR TO INSTALLATION AND
OPERATION.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
Thermostat according to the
®
WARNING: This appliance has a polarized plug (one blade is wider
than the other). As a safety feature, this plug will fit in a polarized
socket only one way. If the plug does not fit fully in the socket,
reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully inserted.
Do not attempt to defeat this safety feature.
WARNING: To guard against injury, basic precautions should be
observed when handling the appliance, including the following:
1.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS and all
important notices on the appliance before using. Failure to do
so may result in in personal injury or damage to the unit.
2.
DANGER – For each of the following situations, do not attempt
repairs yourself; return the product to an authorized service
facility for service if it is still under warranty or discard the
appliance. Do not operate the appliance if it has a damaged
electrical cord or if it is malfunctioning or if it is dropped or
damaged in any manner. Never use with an extension cord
unless plug can be fully inserted. Do not attempt to defeat this
safety feature.
A.
For INDOOR HOUSEHOLD USE ONLY, NOT for commercial use.
B.
Carefully examine the appliance after installation. It should not
be plugged in if there is water on parts not intended to be wet.
C.
Do not operate any appliance if it has a damaged cord or
plug, or if it is malfunctioning or if it is dropped or damaged
in any manner. The power cord of this appliance is a Z type
attachment and cannot be replaced; if the cord is damaged,
the appliance should be discarded. Never cut the cord.
D.
To avoid the possibility of the appliance plug or electrical
socket getting wet, position the unit to one
side of a wall-mounted socket to prevent
water from dripping onto the socket or plug.
A "drip-loop" should be arranged. The "drip
loop" is that part of the cord below the level
of the socket, or the connector if an extension
cord is used, to prevent water from traveling
along the cord and coming into contact with
the socket. If the plug or socket does get wet, DO NOT unplug
the cord. Disconnect the fuse or circuit breaker that supplies
power to the appliance. Then unplug and examine for the
presence of water in the socket.
3.
Read and observe all the important notices on the appliance.
4.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without
supervision.
5.
To avoid injury, do not contact hot surfaces.
6.
Always unplug an appliance from an outlet when not in use,
before putting on or taking off parts, and before cleaning.
Never yank cord to pull the plug from the outlet. Grasp the plug
and pull to disconnect.
7.
Do not use the appliance for other than intended use. The use
of attachments not recommended or sold by the appliance
manufacturer may cause an unsafe condition.
8.
Do not install or store the appliance where it will be exposed to
weather or to temperatures below freezing. Do not expose the
unit to direct sunlight.

Publicidad

loading