GoodHome Kelso Manual Del Usuario página 7

Use
The controls
This appliance can be operated by the manual
controls located on the side of the heater
(LEFT KNOB):
0 OFF position
Fan only
Adjustable thermostat (RIGHT KNOB)
Press this button for SWING: function when
the heater is on. Press it again to stop the
swing.
Thermostat control: Turn the thermostat switch
clockwise or anti-clockwise to set the desired
temperature you require. The thermostat will
attempt to keep the room temperature at the
desired level automatically.
Turn the thermostat clockwise to the maximum
position. Once the desired room temperature is
reached, turn the thermostat anti-clockwise until
the heater switches off. The heater will switch
on and off automatically to maintain the desired
temperature.
196929_s1_s2_5059340046990_GOODHOME_A5_IM_Multi_V04.indb 7
Safety Control (Thermal Cut-Out)
CAUTION: This product has two
overheat protection devices. The first
protection device is an overheat switch
which can be re-set, once the cause
of the overheating has been removed
AND the heater has cooled down.
The product can then continue to be
used normally. The second overheat
protection device is a thermal fuse
which CANNOT be reset by the user.
In the event that the heater stops
working as a result of overheating take
the following immediate steps: switch
the electricity off at the socket and
remove the plug. Remove any objects
that are covering the product.
CAUTION: Do not touch the heater as it
will be hot. Set the heater switches to
OFF and leave the heater to cool down
fully. Once completely cool, reconnect
the heater and switch it on. If it fails
to work it is likely that the secondary
overheat protection device (thermal
fuse) has operated – this overheat
protection system cannot be reset
by the consumer. Do not open this
product. There are no user-serviceable
parts inside.
WARNING: BEFORE TURN OFF THE
HEATER, PLEASE WORKING 20-30
SECONDES IN FAN MODE ONLY IN
ORDER TO LOWER THE INTERNAL
TEMPERATURE OF THIS APPLIANCE.
07
19-05-2020 14:29:47