iRobot Roomba j9 Manual Del Usuario página 13

Replacing the Bag
1
Lift up on the canister lid to
open.
2
Pull up on the plastic card
to remove the bag from the
canister.
Note: This will seal the bag
so dust and debris cannot
escape.
3
Discard the used bag.
4
Install a new bag, sliding the
plastic card into the guide rails.
5
Press down on the lid making
sure that it is completely closed.
Note: To achieve optimal
performance with your robot
and automatic dirt disposal,
clean and/or replace your
robot's filter as needed.
Cleaning the Visual Docking Target and Charging
Contacts
Inspect the visual docking target and
charging contacts to make sure that
they are clear of debris. Wipe with a
clean, dry cloth.
Important: Do not spray
cleaning solution or water onto
the sensors or sensor openings.
Removing Debris from Blower Cover
Inspect blower cover for any lint or
debris build-up, and wipe with a
clean dry cloth to remove.
Roomba™ j9+ Owner's Guide 9
EN