Senix PDDX2-M2 Manual De Instrucciones página 10

OPERATION
WARNING:
Always wear eye, hearing, hand protection to
reduce the risk of injury when operating the
tool. Keep all parts of your body away from the
rotating bit.
RUNNING DIRECTION
The motor runs forward or backward for
driving the bit in or out. It is controlled by the
reversing lever.
WARNING:
Do not change direction of rotation while
chuck is rotating.
Forward
Mode
Forward Driving screws or drill bits
Loosening jammed screws or drill
Backward
Center
Locking the trigger
Lock
EN - 10
Backward
Application
bits
NOTE:
When changing bits or when the tool is not in
use, the reversing lever shall be kept in "center
lock" position to avoid unintended start.
TORQUE
1. 17 torque values are designed for screw
driving.Rotating the torque ring until the
arrow points at the desired value. The
screw will be automatically stopped once
the pre-set torque reached.
NOTE:
The torque required depends on the type and
size of the fastener being driven, as well as the
material of workpiece.
2. " " on the torque ring is designed for
drilling into wood or metal materials. The
motor will continue to output until it pene-
trates workpiece.
WWW.SENIXTOOLS.COM