Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Drilling
a.
Attach a bit specially for drilling and set the
torque ring to "
b.
Pre-drill larger holes with a small diameter
drill bit in advance for a easier operation
and better result.
c.
In order to prevent the bit from slipping,
punch a point beforehand especially when
drilling metals.
d.
Start with a low speed. Gradually increase
speed as drill bit bites into wood.
e.
When drilling through holes, place a block
or wood behind the workpiece to prevent
ragged edges on the back side of the hole.
f.
If necessary, use a cooling lubricant when
drilling metal.
3.
Screw Driving
a.
Attach a driver bit and select a proper
torque according to the type and size of
screw and material of workpiece.
b.
Pre-drill a hole of proper diameter and
depth before driving big screws into
workpiece.
c.
Hold the tool perpendicular to the screw
head and keep the bit tip well fitted into the
screw recess, then switch ton the tool.
d.
Start at a low speed. Gradually increase
speed as the screw driven in.
e.
Remove a jammed screw in the backward
mode.
WARNING:
Do not use the power tool like a hand screw
driver or wrench, this could damage the
automatic spindle lock in the power tool.
MAINTENANCE
WARNING:
Only perform cleaning and maintenance work
according to these instructions!
All further works must be performed by a
qualified specialist!
WARNING:
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION: Make sure the
trigger is locked and battery pack is removed
before performing any procedure in this
section.
TO PREVENT SERIOUS INJURY FROM TOOL
FAILURE: Do not use damaged equipments. If
abnormal noise or vibration occurs, have the
WWW.SENIXTOOLS.COM
".
problem corrected before further use.
There are no user-serviceable parts in your
power tool.
If any of following condition are found, stop
using it and send it to the authorized service
center for repair.
•
leaking, swollen, or cracked battery pack
•
loose hardware
•
misalignment or binding of accessories.
•
cracked or broken parts.
•
any other condition that may affect its safe
operation.
CLEANING
1. Clean dust and debris from air vents.
2. Keep handle clean, dry and free of oil or
grease.
3. Make sure the chuck is not clogged with
debris.
4. Remove stubborn dirt from housing with
high pressure air (max. 3 bar).
NOTE:
Do not use chemical, alkaline, abrasive or
other aggressive detergents or disinfectants
to clean this product as they might be harmful
to its surfaces.
TRANSPORTATION
1. Only carry by its handle.
2. Protect from any heavy impact or strong
vibrations which may occur during
transportation in vehicles.
3. Secure to prevent it from slipping or falling
over.
STORAGE
1. Clean thoroughly as described above.
2. Store in a dark, dry, frost-free and well-
ventilated area that is inaccessible
to children. Store the battery within a
temperature range of 32°F - 77°F (0°C -
25°C).
3. Use original package for storage or cover
with a suitable cloth to protect it against
dust.
13 - EN
Publicidad
