Publicidad
Idiomas disponibles
Idiomas disponibles
Ignition Instructions
Check and ensure that an AA battery （Not Included)
is inside the ignition chamber and has power.
Ensure the anode (+) faces outwards.
1. Ensure that the control knob is OFF. Slowly open
the gas cylinder valve.
2. Press and turn the control knob to LIGHT position,
push the igniter to generate spark while keeping
control knob in pressed position
3. Check for pilot flame through glass tube. If pilot
does not light, turn control knob to OFF position wait
two minutes minimum and try again from the star.t
Several attempts may be necessary.
4. If the pilot s lit, keep control knob pressed for 15
seconds then turn the control knob to LOW.
5. For maximum heat turn control knob to HIGH.
6. To turn heater off, turn control knob to OFF.
7. Close the valve of the gas cylinder or the regulator
after use.
OFF
LIGHT
LOW
HIGH
28
Publicidad
