cecotec CONGA ANIMAL X Manual De Instrucciones página 55

3 Suction motor
error.
4 Main-brush fault.
5 Bumper error.
Fall-detection
sensor error.
Main brush error.
6 Charging error.
7. TECHNICAL SPECIFICATIONS
Conga Animal X
Product reference: 08604
Input: 19 V DC 0.6 A
Battery: 14.4 V DC Li-ion 2000 mAh
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
Check if there are obstructions blocking the air inlet.
Empty the tank.
Clean the filters with a vacuum cleaner or a self-cleaning
brush.
Check if the filters are wet.
Dry the filters in a natural way before using them. Make sure
they are completely dry. IF there are any moisture remains
they could reach the motor and damage the robot vacuum
cleaner.
Check if the main brush is blocked or tangled and clean it.
Carefully clean the sensors with a clean, dry cloth.
Restart the robot vacuum cleaner. To do this, switch the
robot off and on.
Carefully clean the sensors with a clean, dry cloth.
Restart the robot vacuum cleaner. To do this, switch the
robot off and on.
Clean the main brush.
Check if the main brush is installed correctly.
Check if the charging base indicators are on. Otherwise,
contact the official Technical Support Service of Cecotec.
Clean the charging terminals with a clean, dry cloth.
Check if the robot vacuum cleaner beeps when it gets to the
charging base. Contact the official Technical Support Service
of Cecotec.
ENGLISH
55
CONGA ANIMAL X