Princess NOVA 180727 Manual De Instrucciones página 9

CHANGING THE OIL
Make sure the fryer and the oil or fat have cooled down before changing the oil or fat (remove the plug
from the socket). Change the oil regularly. This is particularly necessary when the oil or fat goes dark or
the smell changes. Always change the oil after every 10 frying sessions. Change the oil in one go -
never mix old and new oil. Used oil is harmful to the environment. Do not dispose of it with your normal
rubbish but follow the guidelines issued by the local authorities.
CLEANING AND MAINTENANCE
Never immerse the appliance in water! Remove the plug from the socket.
- All the non-electrical parts can be washed in warm soapy water. Dry thoroughly before reusing.
- We do not recommend that you wash the parts in the dishwasher.
- Clean both inside and outside the fryer regularly.
- Regularly clean the outside of the fryer with a damp cloth and dry it with a soft, clean towel.
- Do not use abrasive detergents.
- When replacing the oil, you can also clean the inside of the fryer. Empty the fryer and first clean the
inside with a paper towel and then wipe with a wet cloth dipped in soapy water.
Then wipe the inside with a damp cloth and allow it to dry.
NOVA TIPS
- While heating up and frying, do not keep the lid on the appliance to prevent condensation.
- Always place the fryer on a stable surface and keep flammable materials away.
- Do not place the fryer on or near a switched-on hot plate.
- Before you use the fryer it must be filled with the required amount of fat or oil. Never use the fryer
without oil or fat as this will break the appliance.
- Never move the appliance during use. The oil becomes hot and you can burn yourself. Wait until the
oil has cooled down before moving the fryer.
- Never immerse the appliance in water!
- Do not leave the appliance unattended while in use. Close supervision is necessary when the fryer is
used near children.
- Do not use the appliance if the cord is damaged. Send it to our service department to minimise any
risk. With this type of appliance, a damaged cord should only be replaced by our service department
using special tools.
- Make sure the thin pipes running along the heating element are not damaged (do not dent or bend).
- The electrical part comes complete with a safety switch which ensures that the heating element can
only operate when the element is correctly positioned in the pan.
- Never use previously defrosted and subsequently refrozen products. These contain a lot of water
which will cause excessive spattering.
- Children should be supervised to ensure that they do not play with the appliance.
- The use of this appliance by children or persons with a physical, sensory, mental or motorial disability,
or lack of experience and knowledge can give cause to hazards. Persons responsible for their safety
should give explicit instructions or supervise the use of the appliance.
In the case of overheating, the pan will switch off
automatically. This safety mechanism can be found
on the bottom of the electrical part. If its switches
off, it can be reactivated by pressing in the button
with a long pointed object. The button is situated
deep behind the hole and you should use the restart
pin supplied. First remove the plug from the socket.
9