Publicidad
Idiomas disponibles
Idiomas disponibles
Initial Setting
Setting the AM Tuning Step (AM)
The tuning step employed in the tuner's AM band can be switched between 9 kHz and
10 kHz per step. Reset the tuning step from 9 kHz (the factory preset step) to 10 kHz when
using the tuner in North, Central or South America.
Specifications
Tuning Steps
Frequency range
1. Press the FUNCTION button and select the AM Tuning Step mode (AM) in
the Initial Setting Menu.
2. Select the desired tuning step
with the 2/3 buttons.
Setting the Warning Tone (WARN)
You can switch the Warning Tone function ON/OFF. (Refer to "Warning Tone" on page
36.)
1. Press the FUNCTION button and select the Warning Tone mode (WARN)
in the Initial Setting Menu.
2. Switch the Warning Tone
ON/OFF with the 5/∞ but-
tons.
Switching the AUX Mode (AUX)
It is possible to use auxiliary (AUX) equipment with this product.
Activate the AUX mode when using external equipment with this product.
1. Press the FUNCTION button and select the AUX Setting mode (AUX) in the
Initial Setting Menu.
2. Switch the AUX Setting
ON/OFF with the 5/∞ but-
tons.
39
Initial Setting
9 kHz
531 – 1,602 kHz
New Setting
10 kHz
530 – 1,640 kHz
Publicidad
