Descargar Imprimir esta página

Buffalo DriveStation HD-HXU3 Serie Manual De Instrucciones página 4

Ocultar thumbs Ver también para DriveStation HD-HXU3 Serie:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
2
Recommended Usage
To avoid damage to your data, follow these precautions:
Never configure this unit as a destination for virtual memory.
Never perform any of the following operations while the access LED is flashing:
• Unplug the USB cable and the power cable
• Turn off your computer
• Put your computer into standby, hibernate, or sleep modes
• Log off, log on, or switch users
* In auto power mode, the DriveStation turns on and off automatically with the computer that it's
connected to.
* The AC adapter must be attached to the DriveStation to use it. The power supplied from USB is not
enough to operate it.
* After you turn off your computer, it may take several minutes for the DriveStation to shut down.
* If this device is connected to an AC adapter with USB hub, the power LED of this device may not be lit
even though you turn on your computer. In such a case, unplug this device from the USB hub.
* A delayed write error may be displayed by some computers when they return from an energy-saving
state. If this happens, detach your drive before putting your computer into an energy-saving mode.
* If the power/access LED does not goes off when you turn off your computer, unplug the USB cable
from the drive. Encryption doesn't protect the drive until the power/access LED turns off.
* Encryption is disabled by default. To use encryption, change to encrypted mode and configure a
password.
* Encryption is only supported with Windows PCs. If encryption is enabled, you will not be able to use
the drive with a Macintosh computer. Disable encryption before using this device with Mac OS.
* Please keep your password safe. You will not be able to access the drive in encrypted mode without
the password.
* When first connected, the drive may take approximately 20 seconds before the power/access LED
comes on and the unit is ready for use.
* The maximum size of a file on the default FAT32 partition is 4 GB. To use the drive with files larger
than 4 GB, reformat the drive with NTFS or Mac OS extended, which allow larger file sizes.
* If you configure multiple partitions on the drive, format each volume before use.
* If you are going to recover from Macintosh, disconnect this unit. It may not be recover without
removing this unit.
Warning
HD-HXU3 User Manual
3

Publicidad

loading