Publicidad
Step 14
Fasten a SMALL DRAWER FRONT (P) to one of the SMALL DRAWER BOX FRONTS (D460).
å
Use two BLACK 7/8" LARGE HEAD SCREWS (17S) through the outer most holes in the SMALL
DRAWER BOX FRONT (D460).
NOTE: The SMALL DRAWER FRONT should overhang the bottom edge of the drawer about 1/4". If
å
it does not overhang the bottom edge 1/4", the DRAWER FRONT is on upside down.
Insert a PULL MOUNT (78K) into one of the holes on the SMALL DRAWER FRONT (P). Insert
å
one end of a PULL (77K) into the hole in this PULL MOUNT. Insert the other end of the PULL into
another PULL MOUNT and insert it into the other hole in the SMALL DRAWER FRONT.
Now, fasten the PULL MOUNTS (with PULL) to the SMALL DRAWER FRONT (P). Use a BLACK
å
1-1/8" MACHINE SCREW (21S) for each PULL MOUNT.
Repeat this step for the other small drawer.
å
P
78K
77K
www.sauder.com/services
D460
78K
21S
BLACK 1-1/8" MACHINE SCREW
(4 used for the PULL MOUNTS)
109843
17S
BLACK 7/8" LARGE HEAD SCREW
(4 used in this step)
21S
Page 19
Publicidad
