Project Source F330 Instrucciones De Ensamblaje página 6

ASSEMBLY INSTRUCTIONS
3. YOU'RE FINISHED – ENJOY
Hardware Used
AA
CSK screw 1 1/4"
(Not included)
1. Cut filler to the desired width / height if needed.
* Please note it is best tape the filler using painters' tape before
cutting to prevent chipping and/or rough edges. If you do not feel
confident in your ability to perform this task, please contact a
licensed professional.
2. Fasten the screw from the inside of the cabinet
box to hold the filler as per the drawing
3
x 3
FILLER PANEL FOR WALL CABINET
1
2
6
AA