Publicidad
Idiomas disponibles
Idiomas disponibles
5459520-Elektrotac-man_a 08.11.10 12:28 Seite 52
9 – Mode of operation
Single trigger
Position the contact switch (2). Press
the unit up against the material, briefly
press the trigger (3) and release. Before
carrying out any work, test the materials
to be joined for suitability and
performance and select the appropriate
staple size in accordance with Figure 6.
Eliminating jams, twisted staples and
nails
Depending on how hard the workpiece
is, individual staples may become
jammed in the device. When this
happens, interrupt the process by
unplugging the tool and remove the
staples from the magazine using a pair
of pliers (4).
Soft materials
Slides, textiles, foam, paper: Stretch the
material as required, and position it
exactly before activating the stapler.
Once you have applied the staples or
nails, they are usually very difficult to
remove.
10 – Maintenance and
environmental
protection
• Clean the machine housing with a
damp cloth only – do not use
solvents! Then dry well. Never
submerge electrical machinery in
water.
• Always ensure that the ventilation
slots of the machine are kept clean.
CAUTION! Electrical and battery
52
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in
accordance with the
2002/96 EC directive for
the disposal of electrical
and electronic waste, and
sent for proper and
environ mentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
• MeisterCRAFT devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Do not drop electrical machines in
water. Please note additional hints
given in the operating instructions.
• MeisterCRAFT devices are subject to
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee
document and the proof of purchase.
Publicidad
