Assembly Instrucions - Crane 50743 Manual Del Usuario

STEP 1.
Flip board face down on a clean surface. Attach the shorter front legs #2 to the holes on the
front of the board (the end of the board with the biggest bean bag hole) then attach longer
Back legs #3 to the remaining back holes.
IMPORTANT!
Flip board face down
on a clean surface
that will not damage
your board.
STEP 2.
Once all four legs have been attached to the bottom of the board ip the board over and position for play.
STEP 3.
Repeat steps 1 & 2 to assemble legs to the second board.
4
Assembly instructions
QTY.
PARTS
x1
Board
Front Leg (Short)
x2
Back Leg (Long)
x2