Descargar Imprimir esta página

DeWalt DXCM601 Manual De Instrucciones página 8

Compresor eléctrico de aire, de una sola etapa y accionamiento por correa

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING: RISK OF HOT SURFACES
WHAT CAN HAPPEN
• Touching exposed metal such
as the compressor head or
outlet tubes, can result in
serious burns.
WARNING: RISK OF ELECTRICAL SHOCK
WHAT CAN HAPPEN
• Your compressor is powered
by electricity. Like any other
electrically powered device,
if it is not used properly it
may cause electric shock.
HOW TO PREVENT IT
• Never touch any exposed
metal parts on compressor
during or immediately after
operation. Compressor will
remain hot for several minutes
after operation
• Do not reach around
protective shrouds or attempt
maintenance until unit has
been allowed to cool.
HOW TO PREVENT IT
• Never operate the compres-
sor outdoors when it is rain-
ing or in wet conditions.
• Never operate compres-
sor with protective covers
removed or damaged.
• Repairs attempted by
unqualified personnel can
result in serious injury or
death by electrocution.
• Electrical Grounding:
Failure to provide adequate
grounding to this product
could result in serious injury
or death from electrocu-
tion. Refer to Grounding
Instructions paragraph in
the Installation section.
8
• Any electrical wiring or
repairs required on this
product should be per-
formed by authorized ser-
vice center personnel in
accordance with national
and local electrical codes.
• Make certain that the elec-
trical circuit to which the
compressor is connected
provides proper electrical
grounding, correct voltage
and adequate protection.

Publicidad

loading