All manuals and user guides at all-guides.com
BEFORE FIRST USE
When you use your appliance for the first time, pour fresh water
•
into the water tank (without coffee) and switch on the appliance.
This operation of rinsing you appliance must be done before first
use.
Once all the water has passed through, switch off the appliance
•
and repeat this operation twice. Let the appliance cool down for
at least 5 minutes before repeating the operation.
SETTING THE CLOCK
Plug in your coffeemaker. The time "12:00" will be displayed on
•
the electronic digital clock.
To set the current time, simply press the Hour button to set the
•
hours, and the Min button to change the minutes.
By each impulse on one of those buttons, the hour or minutes will
•
go with 1 unit but if you keep the pressure, the time will roll
forward more quickly.
NOTE: you can change the set hour anytime you wish by simply
pressing the Hour and Min buttons.
PROGRAMMING THE COFFEE MAKER
Your coffee maker has a 24 hours timing, but the programmed clock
remains in the memory as long as you do not modify it.
Check the time displayed on the clock.
•
Open the lid of the water tank and pour the desired volume of
•
water in it. The water level can be read off the water level
indicator. Never exceed the maximum level indicated.
Insert filter paper or permanent filter (depending on the model) in
•
the filter holder and add the desired quantity of ground coffee.
Never forget to close the water tank lid before switching on the
•
coffee maker.
Press and hold the Timer button. The time "12:00" and 'TIMER" will
•
be displayed on the electronic digital clock.
5
USK TKM 2 - 070508