Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Handling and care
Ice bucket (applicable models only)
If you do not dispense ice for an extended period, ice may form clumps inside the bucket.
If this happens, remove and empty the ice bucket.
A
Untitled-2 59
1. To remove the ice bucket, gently lift it
up, then pull it out slowly while holding
the bottom of the bucket with one hand
and the side with the other hand.
2. Empty the bucket.
3. When done, put the bucket back into
position. If the bucket does not fit in,
turn the helix screw 90 degrees, and
then try again.
If the ice bucket is not firmly inserted,
turn the Helix (A) 90 degrees, and then try
again.
4. After putting the bucket back into
position, gently pull it down and make
sure it is firmly sitting on the slot.
English
59
2023-06-15
11:50:48
Publicidad
