Descargar Imprimir esta página

Samsung RF31CG Serie Manual Del Usuario página 77

Ocultar thumbs Ver también para RF31CG Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

SmartThings
Symptom
Could not find
"SmartThings" in the
app market.
The SmartThings app
fails to operate.
The SmartThings
app is installed but is
not connected to my
refrigerator.
Could not log into the
app.
An error message
appears when I
try to register my
refrigerator.
The SmartThings app is
successfully connected
to my refrigerator but
does not run.
The Wi-Fi icon is
blinking. (
)
Untitled-2 77
• The supporting software version of the SmartThings app is
subject to change according to the OS supporting policy the
manufacturer provides. In addition, as for the SmartThings
app or the functions that the app supports, the new
application update policy on the existing OS version can be
suspended due to usability or security reasons.
• The SmartThings app is available for applicable models
only.
• The old Samsung Smart Refrigerator app cannot connect
with Samsung Smart Home models.
• You must log into your Samsung account to use the app.
• Make sure that your router is operating normally.
• If the Wi-Fi icon on the refrigerator's display is off, this
indicates that no network connection has been established
yet. In this case, use the SmartThings app to connect and
register your refrigerator to the access point (AP) of your
house.
• You must log into your Samsung account to use the app.
• If you don't have a Samsung account, follow the app's
onscreen instructions to create one.
• Easy Connection may fail due to the distance from your
access point (AP) or electrical interference from the
surrounding environment. Wait a moment and try again.
• Exit and restart the SmartThings app, or disconnect and
reconnect the router.
• Power off the refrigerator, and then power it on again after
1 minute.
• Connect your refrigerator with the SmartThings app before
use. When the connection is made successfully, the indicator
stops blinking.
- If you fail to make connection or don't want to use the
app, press and hold the Lock button for 10 seconds.
The indicator stops blinking with "O FF" shown on the
temperature display.
Action
English
77
2023-06-15
11:50:51

Publicidad

loading

Este manual también es adecuado para:

Rf26cg serie