HIKVISION DS-2FSC09-L Guia De Inicio Rapido página 4

standards listed under the Directive 2014/30/EU (EMCD) and
Directive 2011/65/EU (RoHS).
Note: The products with the input voltage of within 50 to 1000
VAC or 75 to 1500 VDC comply with Directive 2014/35/EU (LVD),
and the rest products comply with Directive 2001/95/EC (GPSD).
Please check the specific power supply information for reference.
This product and - if applicable - the supplied
accessories too are marked with "UKCA" and comply
therefore with the following directives:
Electromagnetic Compatibility Regulations 2016,
Electrical Equipment (Safety) Regulations 2016, the Restriction of
the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012.
Directive 2012/19/EU (WEEE Directive): Products
marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For
proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information
see: www.recyclethis.info.
According to the Waste Electrical and Electronic Equipment
Regulations 2013: Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the United Kingdom.
For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it
at designated collection points. For more information see:
www.recyclethis.info.
Directive 2006/66/EC and its amendment 2013/56/EU
(Battery Directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in
the European Union. See the product documentation
for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
According to the Batteries and Accumulators (Placing on the
Market) Regulations 2008 and the Waste Batteries and
Accumulators Regulations 2009: This product contains a battery
that cannot be disposed of as unsorted municipal waste in the
United Kingdom. See the product documentation for specific
battery information. The battery is marked with this symbol, which
may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B) / NMB-003 (B) standards
requirements.
Cet appareil répond aux exigences des normes CAN ICES-003
(B)/NMB-003 (B).
KC
B급 기기: 이 기기는 가정용(B급) 전자파적합기기로써 주로
가정에서 사용하는 것을 목적으로 하며, 모든 지역에서
사용할 수 있습니다.
Safety Information
Please read all the safety information carefully before using.
Laws and Regulations
The device should be used in compliance with local laws, electrical
safety regulations, and fire prevention regulations.
Electricity
In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region. The
equipment shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
equipment. Provide a surge suppressor at the inlet opening of the
equipment under special conditions such as the mountain top,
iron tower, and forest. CAUTION: To reduce the risk of fire, replace
only with the same type and rating of fuse.
Battery
 CAUTION: Risk of explosion if the battery is replaced by an
incorrect type.
 Improper replacement of the battery with an incorrect type
may defeat a safeguard (for example, in the case of some
lithium battery types).
 Do not dispose of the battery into fire or a hot oven, or
mechanically crush or cut the battery, which may result in an
explosion.
 Do not leave the battery in an extremely high temperature
surrounding environment, which may result in an explosion or
the leakage of flammable liquid or gas.
 Do not subject the battery to extremely low air pressure, which
may result in an explosion or the leakage of flammable liquid or
gas.
 Dispose of used batteries according to the instructions.
Fire Prevention
No naked flame sources, such as lighted candles, should be placed
on the equipment. The serial port of the equipment is used for
debugging only.
Power Supply
Use a power adapter provided by qualified manufacturers. It is
recommended to provide an independent power adapter for each
device as adapter overload may cause over-heating or a fire
hazard.
Transportation
Keep the device in original or similar packaging while transporting
it.
Installation
 If the device needs to be wired by yourself, select the
corresponding wire to supply power according to the electric
parameters labeled on the device. Strip off wire with a standard
wire stripper at corresponding position. To avoid serious
consequences, the length of stripped wire shall be appropriate,
and conductors shall not be exposed.
 Make sure that the power has been disconnected before you
wire, install, or disassemble the device.
 If smoke, odor, or noise arises from the device, immediately
turn off the power, unplug the power cable, and contact the
service center.
3
Français