INSTRUCTIONS FOR USE
EN
Turn on/Turn off fan
Change sense of rotation
Natural wind (Speed cycle
1-6 progressive)
Turn off light
Speed 1
Speed 2
Speed 3
Speed 4
Speed 5
Speed 6
Timer 2H/Wifi button
WIFI FUNCTION
Step 1: Turn on WIFI and connect to 2.4G net work, then turn on Bluetooth, Turn on Fan power
supply within 30seconds, long press the "2H" key on remote control at least 5 seconds, Open the
Tuya apps.
Step 2: Click "Add device"
Step 3: Click "Add "
If the ceiling fan is not searched:
*Make sure WIFI and Bluetooth are both turned on.
*This ceiling fan needs to use 2.4Ghz WIFI to connect.
*Make sure the WIFI net work is stable.
12
Short press: Turn on warm light
Short press: Turn on neutral light
Short press: Turn on cold light
Change light intensity
Step 4: Waiting for the connection
If the Connection is not successful within 3 Minutes, retry to
pair the fan: Turn off the fan power supply for 10 seconds,
then turn on the Fan power supply again and long press
the "2H" key until you hear 2 or more beep sounds from the
receiver to enter pairing mode.
TRAMONTANA DC
Step 5: Connect successfully and
Step 6: Click "Finish" to enter the
then click "Next"
interface
CLEANING AND MAINTAINENCE
Cleaning:
1/ Before cleaning, turn the unit off, cut off the power supply
from electrical outlet and wait for the unit to cool down.
2/ To clean the unit, use a soft cloth to wipe off any dust.
3/ Do not try to open the unit without a licensed electrician.
Improperly installed the unit can be dangerous.
4/ Clean the unit at least once a year.
Correct disposal:
The crossed-out wheeled bin symbol indicates that the item should be
disposed of separately from household waste. The item should be handed
in for recycling in accordance with local environmental regulations for waste
disposal. By separating a marked item from household waste, you will help
reduce the volume of waste sent to incinerators or land-fill and minimize any
potential negative impact on.
WIFI FUNCTION
Step 7: In this way, it can operate
the fan
Maintainence:
1/ Have your product repaired by a licensed electrician
2/ This electric product is in accordance with the relevant
safety requirements. Repairs should only be carried out by
licensed electricians using original spare parts, otherwise
this may result in considerable danger to the user.
3/ Please contact the store which you bought the product
for after sale services if any.
EN
13