Quicke Flexigrip 160 Manual Del Operador página 15

Hose kit
Connect the hose to the cylinder.
The hose connected to the cylinder's (+) is marked in red.
The hose connected to the cylinder's (-) is marked in blue.
The loader should be equipped with a double-acting oil
return on the implement attachment.
Warning!
When installing the hoses, check that these
are long enough and that they do not get stuck
between the tool carrier, the loader beam or the
links. If necessary, adjust the couplings.
The Attachment set is order separately from your dealer. Fit
the attachment set as shown in supplied instruction.
Euro
BLUE(-)
RED(+)
Fig.21 Example of fitting the attachment.
13
Driving instructions
Qfit