Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Micro Speaker
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous voltage within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING:
Users of this product are cautioned not to make modifications or changes that are not
approved by MEM-CE, LLC., doing so may void the compliance of this product and may result in the
loss of the user's authority to operate the equipment.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty
for this product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these Instructions.
2.
Keep these Instructions.
3.
Heed all Warnings.
4.
Follow all Instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any of the ventilation openings. Install in accordance
with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
HOW TO USE THE MEMOREX MW202
Congratulations on your purchase of the Memorex Portable Bluetooth
Technology, makes it easy to take your tunes anywhere. Its amplified power output produces a bold sound from a durable,
compact speaker size. Take the micro speaker with you anywhere, untethered from a power source with rechargeable Lithium
Ion Battery and USB Charging Port. Please follow these operational instructions carefully. Save them for future reference.
RECHARGEABLE BATTERY
The MW202 Portable Bluetooth
®
Micro Speaker features a built-in rechargeable battery that can be charged through the USB
Charging Port located on the back of the unit. Plug the other end into an AC-Powered USB device or outlet.
Notes:
Remove the USB plug and charging cable to disconnect when not in use.
The USB input is only used for recharging the MW202. It does not support battery charging or playback from external
devices.
If the battery charge is running low, a warning tone will sound every 30 seconds, and will eventually switch itself off;
recharge the internal battery to restore power.
OPERATION
Pair a Bluetooth-Enabled Mobile Device
1.
Turn on MW202 by sliding the Power Switch located on bottom of the unit to the
will turn Blue.
2.
Turn on your Bluetooth-enabled device and place it within 30 ft/10 m (without barrier) of the speaker.
3.
You will hear an audible tone indicating the Bluetooth connection is now enabled, and the blue LED will blink quickly when
in pairing mode.
4.
Refer to your mobile device for instruction on enabling Bluetooth. It is usually located in the Settings menu or similar
location.
After enabling, "Memorex MW202" will appear as an option on your device. Select it and your mobile device will connect with
the Memorex MW202. Use "0000" if a pairing code is necessary.
Upon successful connection, the blue LED light will blink every 4 seconds. If pairing or connection fails, or is not completed
within a few seconds, the speaker will exit pairing mode, indicated by a long beep and the LED indicator will return to a slower
blinking rate.
If connection is lost after successful pairing, check to make sure the distance between speaker and Bluetooth-enabled device
does not exceed 30 ft/10 m. If the connection is interrupted due to low battery, turn the speaker off, recharge the internal
battery, and repeat steps when fully charged.
Note: When turned on and in Bluetooth source mode, the speaker will automatically try to connect to the most recently played
paired device, when available.
Portable Bluetooth
I'll Play Your Tunes
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long
periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14. WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. Do not place objects filled with
water, such as a vase, on the apparatus.
15. The AC mains plug is used as the power disconnect device and it
should remain readily accessible and operable during intended use. In
order to completely disconnect the apparatus from power, the mains
plug should be completely removed from the AC outlet socket.
®
Micro Speaker! The MW202, with built-in Wireless
position for Bluetooth pairing. The LED
Listen to Music
1.
When the Bluetooth-enabled device is paired, use the device to Play and Pause music. The sound will be heard through
this speaker.
2.
Adjust the speaker volume level using the volume controls on your mobile device.
Listen to Music Using Line-In Source
1.
Slide the Power switch to the ON position. The LED indicator will turn Red.
2.
Insert one end of the audio cable (included) into the Line Out Jack (or Headphone Jack) on your external audio device and
the other end into the Line-In Jack on the micro speaker.
3.
Use the connected external audio device to play and pause music. Sound will be heard through the speaker.
4.
Adjust the speaker volume level using the volume controls on the audio device.
Notes:
The Bluetooth connection will not terminate when switching between Bluetooth and Line-in Sources.
There will be no audible tone effects when connected to a Line-in source.
AUTO OFF
The MW202 will automatically shut off if there is no music from a Line-in source or from a Bluetooth-enabled device for more
than 20 minutes.
MAINTAINING YOUR SYSTEM FOR CONTINUED ENJOYMENT
When not in use, turn off the MW202. To extend the battery life of your external audio/mobile device, turn off the Bluetooth
signal when not in use.
Keep the unit away from direct sunlight and excessive heat.
Clean durable rubberized exterior with a damp soft cloth.
Protect your furniture when placing the unit on wood and lacquered finishes.
LED INDICATOR
MODE
LED EFFECT
OFF
OFF
ON
Blinks 3x Blue
Pairing
Blinking Blue
ON (Connected)
Solid Blue
ON (Pairing Fail/Disconnect)
OFF
Max/Min Volume Reached
Solid Blue
TROUBLESHOOTING
Sound not clear or no sound
Check volume levels on both MW202 speaker and connected device.
Check distance between speaker and connected device.
Music doesn't transfer from external device to MW202
Make sure you are using a Bluetooth-enabled device.
Select the MW202 as your speaker device, disconnect speaker and device from pairing with all other devices.
Check if both devices are connected.
Restart the MW202 and auto connect with the Bluetooth-enabled device.
LED will not illuminate
Make sure the internal battery has been charged.
Check power switch position on bottom of unit.
SPECIFICATIONS AND COMPATIBILITY
Frequency .......................................................... 20Hz~20KHz
Transmission Range ..................................................30ft/10m
Output Power.....................................................................3W
Dimensions .......................................................45x45x54mm
LOCATION OF CONTROLS
1
LIMITED WARRANTY
MEM-CE, LLC. warrants this product against defects for 90 days from the date of original purchase. MEM-CE, LLC. shall not
be responsible for any lost data or other incidental or consequential damages related to this product. Some jurisdictions do not
allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so
the above limitations or exclusions may not apply to you. This limited warranty gives you specic legal rights, and you may have
other rights which may vary from one state, province or country to another.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR MEM-CE, LLC.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT: WWW.MEMOREX-CE.COM
OR CONTACT CUSTOMER SERVICE: For customers calling within the United States and Canada, call 1-877-363-6673
MEM-CE, LLC.
11485 Valley View Road, Eden Prairie, MN 55344 USA MEMOREX-CE.COM
Memorex and the Memorex logo are trademarks of Imation Corp and its affiliates. The Bluetooth
owned by Bluetooth SIG, Inc. and any use of such marks by Imation Corp is under license. All other trademarks are the property of their respective
owners.
For additional setup, operating assistance or an electronic version of this user manual, please visit www.MEMOREX-CE.COM
User Guide
Please read these instructions completely
before operating this product.
MEMOREX-CE.COM
MODE
LED EFFECT
Volume Button still being pressed Solid Blue
Low Battery
Blinking Blue
every 30 seconds
Charging
Blinking Blue
Line-in Audio source in use
Solid Red
Weight .............................................................................52g
Compatibility .................................... Compatible with Bluetooth
v2.1 + EDR (Enhanced Rate) or 2.1 Standard
Accessories .......................... USB Cable, Line-in Cable, Manual
1.
Power Switch
2.
USB Charging Port
3.
LED Indicator
4.
Line In Jack
2
3
4
®
word mark and logos are registered trademarks
MW202

Publicidad

loading

Resumen de contenidos para memorex MW202

  • Página 1 (servicing) instructions in the literature accompanying the appliance. AUTO OFF The MW202 will automatically shut off if there is no music from a Line-in source or from a Bluetooth-enabled device for more WARNING: than 20 minutes.
  • Página 2 • Cuando no se encuentre en uso, APAGUE el MW202. Para extender la vida de la batería de su dispositivo de audio / móvil La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) externo, apague la señal de Bluetooth cuando no esté...