MadCatz C.A.T. 12 Manual Del Usuario página 5

02
Connection mode
Insert the Switch into the handle and connect it to the Type-C interface.
Lighting Control Instructions
1. LIGHT color setting
Lightly press the light button on the right handle. Click the button to cycle through the colors
in this order: red, yellow, blue, green, purple, orange, white, and phantom color.
2. LIGHT breathing effect setting
Double-click the light button. The first double-click activates monochromatic LED magic breath,
the second double-click activates RGB seven-color breathing, and the third double-click turns
off the light.
3. LIGHT brightness adjustment
Press and hold both the light button and the directional key ‒ Up to brighten the light or Down
to dim it. There are four brightness levels: 25%, 50%, 75%, and 100%.
Turbo Function
1. TURBO settings
To activate Turbo function, press the A/B/X/Y/L1/L2/R1/R2/cross key and Turbo button
simultaneously for the first time.
To enable AUTO TURBO function without setting Turbo, press the Turbo button again for the
second time.
To cancel Turbo function without setting Turbo, press the Turbo button again for the third time.
To clear the Turbo function of all buttons, press and hold the Turbo button for 5 seconds.
A vibration will indicate that clearing was successful.
2. TURBO speed adjustment
There are three speed settings: A (5 consecutive shots per second, 1st level), B (12 consecutive
bursts per second, 2nd level), and C (20 consecutive bursts per second, 3rd level).
To adjust the speed, press the Turbo button and the "+" key to increase the speed by one gear
or press the Turbo button and the "-" key to reduce the speed by one gear.
Motor Vibration Regulation
There are two buttons to change the vibration settings: "Enhance Vibration" and
"Dampen Vibration". The vibration can be adjusted to five different levels: 100%, 75%,50%, 30%,
and off. Once you have made an adjustment, the motor will vibrate for 0.5 seconds to confirm
the new level. Settings remain after power turned off.
C.A.T. 12
ENGLISH
EN