Playback Connection/Setting - JVC BR-DV3000E Manual De Instrucciones

PLAYBACK
This section explains the required connection, setting and operation method for using this
unit as a player.
Connection
Using this unit as a standalone device
DV IN/OUT
AUDIO VIDEO
LINE
CH 1/3 CH 2/4
VIDEO LINE OUT
AUDIO OUT
Connecting this unit to a video device with a DV terminal
It can record with almost no loss in image or sound quality.
DV
terminal
DV IN/OUT
AUDIO VIDEO
LINE
CH 1/3 CH 2/4
Player: the rear panel of the main unit
Memo
• Turn the power of both devices OFF and connect the DV cable.
• Do not insert incorrectly (in reverse) the DV cable end to DV port of both devices.
• If the recorder is a GY-DV500 or GY-DV700W, and BR-DV3000 is put to PLAY from the STOP
mode, the phase of the EE audio output from the camcorder will be displaced. There is no problem
with the recorded signals.
• For GY-DV300E, GY-DV500E and GY-DV700W, DV input is not possible.
Connecting this unit to a video device with no DV terminal (analogue signal):
Player: the rear panel of the main unit
DV IN/OUT
AUDIO VIDEO
LINE
CH 1/3 CH 2/4
VIDEO LINE OUT
AUDIO OUT
E-42
Connection/setting
–
Y/C
REMOTE
DC12V
NTSC/PAL
9PIN SERIAL NTSC PAL
Y/C (S) OUT
DV cable (available separately)
Y/C
REMOTE
DC12V
NTSC/PAL
9PIN
SERIAL NTSC PAL
Y/C
REMOTE
DC12V
NTSC/PAL
9PIN SERIAL NTSC PAL
Y/C (S) OUT
Video cable
Audio cable
Y/C (S) video cable
Video cable
Audio cable
Another VTR
Another VTR
Y/C
IN
Y/C (S) video cable
–
Monitor
DV
terminal
VIDEO AUDIO
IN IN
Monitor
Monitor