Publicidad
Idiomas disponibles
Idiomas disponibles
Dash Control Installation
Placement and Mounting – The dash control may be mounted
under the dash using its own bracket or through a custom hole
in the dash. It should be within reach of the driver and in a spot
where the LED is plainly visible.
Dash Bracket Installation – The dash control mounts with two
screws which attach to the underside of the dashboard. Slide
under the dash and place the dash control in its mounting
position, mark the two mounting holes, drill pilot holes, and
secure with two screws.
Custom Installation – For that custom, finished look, the ACR-1
can be flush mounted directly on the dash/console panel (or
anywhere else). Referencing the drawing right, disassemble the
ACR-1. Drill a 9/32" (7 mm) hole in the panel for the control along
with a 3/32" (2.3 mm) hole for the lock tab and a 1/8" (3 mm) hole
for the LED. Reassemble the ACR-1 components on the dashboard
or console.
Owner's Enjoyment Manual
EN-15
Publicidad
