Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION (CONTINUED)
NOTE: Allow the pump power cord to hang at a lower level than
the wall outlet to form a "drip loop". This will help prevent water
from dripping down the power cord and getting into the wall outlet.
7. Always unplug the fountain pump and any other independent electrical accessories (e.g.
lights) from the outlet when not in use and before cleaning or replacing parts.
8. Disconnect the power cord from the outlet by holding the plug, not by pulling on the power
cord.
9. Do not expose the pump to direct sunlight or to low temperatures for any period of time.
10. Keep the power cord away from high temperatures or heat sources.
11. This fountain pump is not intended for commercial use.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 10 minutes
No Tools Required for Assembly
5
GFCI
DRIP LOOP
Publicidad
