Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE (CONTINUED)
•
Check regularly that the water reservoir has sufficient water to cover the pump at all times.
It will be necessary to check more frequently in warm or windy weather.
•
Disconnect the power and empty the reservoir if the fountain will not be used for an
extended time.
•
If installed outdoors and in a freeze-prone area of the country, ensure all water is removed
and the unit is completely dry before temperatures drop too low. This product is NOT to be
operated below 41°F or freeze damage may occur.
•
Store your product indoors during winter months. Avoiding extreme cold temperatures will
prevent from exposure damage.
•
Keep this manual for future reference.
Replacing the LED Light
1
Rotate the preassembled ring found
over the end of the light. Disconnect the
light end from the power cord for the
lights.
Model#
Description
YH-505MIX
Frequency
Flow Height
60 Hz
NOTE: The pump data in this manual is from
lab tests. The actual pump may be different
due to the method of production or technical
improvements. This data can be used as a
reference when purchasing a similar pump.
2
Pull out the LED light and replace it
with a new one, then reverse step 1
and finish installing the new LED light.
9
.
Volt
water
120 V
pump
Flow Volume
200cm
1000L/hour
Power
25W
Publicidad
