it up at 100% power for 10 minutes. Then wipe the chamber walls with a soft,
dry cloth.
m) Do not clean the device with acidic substances, medical products, thinners,
fuel, oil, or other chemicals as this may damage the device.
n)
Air filter maintenance:
The front filter serves as the air inlet of the unit and should be cleaned regularly
to ensure that the heating chamber is kept clean.
a) Air filter
b) Air filter mounting bolts
To clean the air filter, unscrew its 2 mounting screws (b) and remove the filter.
Wash the removed filter in warm soapy water. When completely dry,
reassemble in reverse order of the disassembly.
ATTENTION: do not use the device without the filter installed!
o)
Maintenance of the splash guard:
The splash guard is located inside the heating chamber on its top wall.
Hold the two locks holding the cover with your hands (as shown in the picture
with lines). Press in the direction shown by the arrows in the picture above and
pull the cover down to remove the locks.
Wash the cover and dry it before assembly.