Sage Citrus Press Pro SCP800 Guia Del Usuario página 7

Care & Cleaning
• Always ensure that the juicer is turned OFF
at the ON/OFF switch and the plug is removed
from the power outlet before cleaning,
disassembling, assembling and storing the
appliance.
• Follow these instructions to clean all surfaces
or parts that come into contact with food during
juicing.
• For easy cleaning immediately after each use
rinse removable parts under warm water to
remove wet pulp. Allow parts to air dry
before reassembling.
• For thorough cleaning after disassembling the
appliance, all removable parts should be washed
in hot soapy water or on the top shelf of the
dishwasher. The base and juice press arm should
be wiped with a soft, damp cloth. All parts should
be dried thoroughly before reassembling.
• Store the cleaned and reassembled juicer in an
upright position in a cool, dry place. Do not place
any items on top of the juicer while stored.
• Rinse or wash all removable parts immediately
after use. Dried citrus pulp is difficult to remove
and may stain. If any staining does occur,
wipe the discoloured part(s) with undiluted
dishwashing liquid, rinse and dry thoroughly.
• Do not soak the filter or other removable parts in
bleach. Never immerse the motor base in water
or any other liquid. Do not use harsh abrasives.
EN
7