Brother 888-X74 Manual De Instrucciones página 42

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Use the cleaning brush or a vacuum
6
cleaner to remove any dust from the
bobbin race and its surrounding area.
1
2
1 Cleaning brush
2 Race
• Do not apply oil to the bobbin case.
Insert the bobbin case so that the L mark
7
on the bobbin case aligns with the G mark
on machine as shown below.
1
2
• Align the L and G marks.
3
1 L mark
2 G mark
3 Bobbin case
• Make sure that the indicated points are
aligned before installing the bobbin case.
41
1
2
Install the needle plate, and then tighten
8
the screws.
1 Screws
• Make sure that you install the needle plate
securely.
CAUTION
Never use a bobbin case that is
G
scratched; otherwise the upper thread
may become tangled, the needle may
break, or sewing performance may
suffer. For a new bobbin case (part code:
XE9326-001), contact your nearest
authorized Brother Service Center.
Make sure that you fit the bobbin case
G
properly, otherwise the needle may
break.
1