9. PRESCRIPTIONS AND RESTRICTIONS
KEEPING PHARMACEUTICAL PRODUCTS, GLASS BOTTLES OR FLASKS IN THE SHOWCASE IS STRICTLY
FORBIDDEN as they could get broken and entail a safety hazard (fig. 14).
Except for the condenser guard, which needs to be removed in order to clean the condenser, DO NOT
REMOVE COVERS OR PANELS WHEN IT REQUIRES THE USE OF TOOLS. MOST OF ALL DO NOT REMO-
VE THE ELECTRIC CONTROL BOARD COVER.
Do not expose the showcase to atmospheric agents (fig, 16).
ATTENTION! Do not spill water directly or indirectly on the showcase (fig. 13). Do not touch the machine
with damp or wet hands or feet; do not use it while barefoot (fig. 15).
ATTENTION! The refrigerating system does not alter defrost water in any way, which is the product of the
steam contained in the air circulating inside the showcase. Defrost and wash water may nonetheless mix with
pollutants deriving from the products preserved in the appliance, from preservation means, from product
remains, from the accidental crush of recipients containing liquids or from the use of improper detergents
(see section 10 point 1). THE WATER PRODUCED BY THE SYSTEM MUST THEREFORE BE DISPOSED OF
THROUGH THE SEWER OR PURIFICATION SYSTEM IN COMPLIANCE WITH THE REGULATIONS IN FORCE.
IMPORTANT: ANY OTHER USE NOT EXPLICITLY MENTIONED IN THIS BOOKLET MUST BE CONSIDERED AS
HAZARDOUS. THE MANUFACTURER DISCLAIMS ALL LIABILITY FOR ANY DAMAGE RESULTING FROM
IMPROPER, INCORRECT OR UNREASONABLE USE.
10. ORDINARY MAINTENANCE
ATTENTION! BEFORE MAINTENANCE OR CLEANING, DISCONNECT THE SHOWCASE FROM THE POWER
MAINS USING THE WALL MAIN CUTOFF SWITCH (fig. 20).
IMPORTANT! During maintenance or cleaning operations, be sure that the light in the working area is suffi-
cient. If necessary, use an additional source of light. Mind also the hot and moving parts marked with the
relevant symbol. The use of heavy-duty gloves is recommended.
CLEANING THE CABINET
1) Every week clean the outer surfaces of the showcase with mild soap or detergent in lukewarm water only. Wipe
carefully with a soft cloth. Never clean it using inflammable or scouring agents, alcohol, acetone or solvents. NEVER
CLEAN THE DISPLAY CASE BY THE USE OF WATER JETS (fig. 13). Clean glass surfaces using glass-cleaning pro-
ducts only. The use of water is not recommended here, as it may cause scale to build up.
2) Every month clean the cabinet inside surfaces following the instructions provided in the preceding item and those
indicated here below. On the back of the cabinets there is water drain, provided of cork, for the water of washing (fig. 3).
·
Disconnect the cabinet from the power mains using the wall main cutoff switch (fig. 27).
·
Empty the appliance, store its contents in coldrooms or refrigerators that are adequate for keeping the requisite
preservation temperature.
·
Wait until the showcase has reached ambient temperature and then clean according to the above instructions.
·
After having carefully checked that the cabinet is completely dry, reassemble it and switch it on.
·
Allow a couple of hours before loading the products back again.
24