Publicidad
Basic Operation
1. Connect speakers using speaker connecting cable from the passive speaker to active speaker.
2. Connect power cable from the active speaker to the wall outlet and turn power switch on, LED indicator will be lit and
the speakers should be ready to go.
3. Connect audio source (mobile phone, tablet, etc.) to LINE/AUX input port on the rear panel of the active speaker using
audio cable.
4. Press the "
5. Play music via the connected device and adjust the settings to a desired level.
Note: If pressing the "-" or "+" button continuously, LED indicator will flash continuously; When the indicator is no longer
flashing, it indicates that the volume has been at the minimum or maximum level.
Green: Line In/AUX
5
English
" button to switch between Bluetooth and Line In/AUX input modes.
Blue: Bluetooth
Publicidad
