automatic trigger function for reverse camera
comes with: remote control, cables and table stand
OSD (on-screen display)
operation mode: touch buttons
5.
Overview
Refer to the illustrations on page 2 of this manual.
Image A - Panel
1
input switch (AV1 – AV2 – HDMI)
2
TFT menu
3
ON/OFF button
Image B - Remote
input switch (AV1 – AV2 – HDMI -
6
VGA)
7
decrease button
8
aspect ratio (16:9 – 4:3)
Image C - Batteries
12
back of remote controller
13
battery slot
Image D - DVD connection
16
video input 1 (yellow)
17
video input 2 (yellow)
18
right audio input (red)
19
left audio input (white)
Image E – Back of the monitor
24
RCA port
25
HDMI port
26
VGA port
6.
Connecting the monitor
The numbers between brackets refer to the illustrations on page 2.
1.
Choose a mounting location, depending on the purpose of the monitor.
2.
Mount the mounting bracket and attach the monitor to the bracket with the screw.
3.
Connect the monitor jack [23] to the monitor [28].
4.
Connect a camera/video/DVD... (not incl.) to a video input [16] or [17].
5.
Connect the sound output of that device to the audio inputs [18] or [19].
6.
Connect the power supply to the power in [27].
7.
Using the monitor
1.
Press button
2.
Press the Mode button on the monitor (remote control: Video Select) to select the input channel.
3.
Press the Mode select button on the remote control to set the aspect ratio (16:9 or 4:3).
4.
Press the Menu button on the monitor or remote control to enter monitor setup.
Use the Mode button to navigate through the settings.
o
Use the up () or down () buttons to change the settings
o
On the remote control, use the and buttons.
Menu options
The menu options are:
V. 01 – 06/06/2013
on the monitor or remote control to switch on the monitor.
MON9TA2
4
decrease button
5
increase button
9
menu button
10
increase button
11
ON/OFF button
14
battery
15
lock
20
+ 12 VDC (red)
21
gnd (black)
22
cable for reverse camera (blue)
23
monitor jack
27
power in
28
dvd connector
29
speakers
4
©Velleman nv