Changing The Gas Type - arilex 2ASG Instrucciones De Uso

Countries Category I 3B/P ,I
3+ ,I P
ISO 7 - 1
Germany
Austria
Belgium
Denmark
Spain
Finland
France
Greece
Ireland
Island
Italy
Luxembourg
Norway
Netherlands
Portugal
UK
Sweden
Switzerland
2.5.- CHANGE OF THE TYPE OF GAS
It must be done by an authorized installer. ATTENTION: If the type of gas
or pressure is modified, the nameplate that is attached to the spare parts
on the left side of the plate must be placed, overlapping the previous
label, allowing to identify without any ambiguity the state of the iron after
the modification.
1º Remove the side cover
2º Loosen the injectors
3º Remove the injectors with a wrench
4º Place the new injectors
It is not necessary to regulate the primary air.
TABLA T-1
ISO 228
- 1
Yes
Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes Yes
Yes
Yes Yes
Yes
Yes
Other Other Categories
Con-
nections
according
ISO 7 - 1
to 2.1.4.
Yes Yes
Yes Yes
Yes Yes
Yes
Yes Yes
Yes
Yes Yes
Yes Yes
Yes
Yes
Yes
Yes
Yes Yes
Yes Yes
Other
Connec-
tions with
bicone
ISO 228
- 1
Yes
Yes
Yes
Yes
Yes
Yes Yes
Yes
14