Descargar Imprimir esta página

Olivetti ECR 7700LD eco Plus Guía De Usuario página 21

Ocultar thumbs Ver también para ECR 7700LD eco Plus:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 86
Department Names
You can assign a name of up to 12 characters long to each
of the 40 departments available.
The department names that you define will be printed on
the customer receipts, journal reports and on all
management reports.
1. Control key position: PRG.
2. Press
repeatedly until displaying the message
"DP01" indicating the first customizable department.
3. Press
repeatedly until displaying the desired
department number on the left-hand side of the operator
display.
4. Enter the letters or characters of the string you wish to
define and then press
5. Repeat steps 3 and 4 for all desired department names.
6. Press
to exit
Example: Name department 3 "BOOKS" by using the
alphanumeric keypad.
Department number
Switch to Department
name definition mode
selection
Type/Press:
Confirm entered
department name
PLU Item Names
After associating a price to a PLU code, you can name the
PLU to identify the product that it represents. The name that
you can associate to the PLU code must be up to 12
characters long.
The PLU names that you define will be printed on the
customer receipts, journal reports and on the PLU
management reports.
1. Control key position: PRG.
2. Press
to display the message "PL001" indicating
the first PLU.
3. Press
repeatedly until displaying the desired PLU
number on the left-hand side of the operator display.
4. Enter the name to assign to the PLU and then press
.
5. Repeat steps 3 and 4 for all desired PLU names.
6. Press
to exit.
8
.
Exit
Example: Name PLU 2 "COFFEE" by using the
alphanumeric keypad.
Switch to PLU Name
definition mode
PLU number selection
Type/Press:
Confirm entered
Exit
PLU name
Percent Discount (-%) or Add On (+%)
Setting this option automatically calculates the preset
discount or add on rate each time
percentage rate can be discounted from, or added on to,
an individual item or sales transaction total.
1. Control key position: PRG.
2. Type the [numbers] representing the desired
percentage rate. Up to four digits ranging from 0 to
99.99 can be used. Two digits must be placed before
the decimal point and two must be placed after.
3. Define whether the percentage rate is a discount or an
add on by pressing the related code indicated below:
0 = Percent add on
1 = Percent discount
3. Press
to store the rate.
Example: Program a standard 5.50% discount rate.
Type/Press:
Units
Decimals
Sign
key is pressed. The

Publicidad

loading