LG GT360 Guia Del Usuario página 59

When SIM changed or Immediately.
Change codes - Change your Security
code, PIN1 code or PIN2 code.
Using flight mode
Use this function to switch the flight
mode On or Off. You will not be able
to make calls, connect to the internet,
send messages when Flight mode is
switched On.
Using power save
Choose to switch the power saving
settings Always on, Night only or Off.
Resetting your phone
Use Reset in phone settings to reset all
the settings to the factory definitions.
You need the security code to activate
this function.
Viewing memory status
Your GT360 has three memories available:
the phone, the SIM card and an external
memory card (you may need to purchase
the memory card separately).
You can use the memory manager to
determine how each memory is used and
see how much space is available.
Press Menu and select Settings. Choose
Memory status and you will then see the
current status of the memories Common,
Reserved, SIM card and External
memory in your GT360.
TIP! See Installing a memory card for
more information.
Changing your Bluetooth
settings
Press Menu , Connectivity, then
1
choose Bluetooth.
Choose Bluetooth settings. Make
2
your changes to:
My visibility - Choose whether to
Show or Hide your device to others.
My name - Enter a name for your
GT360.
My address - View your Bluetooth
address.
Changing your connectivity
settings
Your connectivity settings have already
been set up by your network operator,
so you can enjoy your new phone
from the off. If you want to change any
settings, use this menu.
01
02
03
04
05
06
07
08
53